16-03TC-VN-SHLD-1000ft (k2 color code black, red & blue conductors)
3c-16awg PVC Shielded Tray Cable UL Type TC / TC-ER – 600V TFFN Insulation – PVC Jacket
APPLICATION: Primarily used for power, control, signal, communication and lighting circuits in commercial and industrial environments. Suitable for installation in cable trays, supported by messenger wire in open air, raceways, channels, conduits and ducts. Approved for direct burial and outdoors in cable trays where sunlight resistant is required. Also may be installed in wet or dry locations or in areas exposed to chemicals and oils
SHIELD: • 100% coverage spiral wound Aluminum-Mylar tape shield, with a 7 strand tinned flexible copper drain wire
JACKET: • Flame and sunlight resistant black PVC rated 90°C wet or dry per UL 1277. Ripcord provided for jackets with thickness of 60 mils or less.
STANDARDS: • UL Listed as TC-ER (Exposed Run) per UL Standard 1277 and used in accordance with NEC for 3 or more conductors • Approved for Class 1 or 2, Division 2 industrial hazardous locations per NEC • Rated 90°C wet or dry • Meets cold bend test at -25°C • ICEA S-95-658, ICEA S-73-532 • UL 66, UL1277 • UL1685 and IEEE 383 70,000 BTU Vertical Flame Test • UL Listed to IEEE1202 and CSA FT4 70,000 BTU Flame Test
CONDUCTORS: • Fully annealed bare copper Class B compressed strand per ASTM B-3 and ASTM B-8
INSULATION: • Heat and moisture resistant Polyvinylchloride (PVC) per UL 66 • Clear Polyamide (Nylon) jacket per UL 66
